Whirlpool Ultimate Care II LSQ9549L Top Load Washer "washer grounded lid hot" Questions

Ad

Question about Whirlpool Washing Machines

1 Answer

...problem for a whirl pool washer The quick plug to the lid switch has 3 wires. A green wire that is connected to the frame for ground and two hot wires Jump them 2 hot wires and she will run. MORE ...

Ad

Question about Kenmore Washing Machines

2 Answers

...washer was in spin. So all washers are equipped with a safety lid switch. Thank you Ralph Nader. Here is a video which shows how to replace the lid switch: I have videos, a service manual and more ...

Ad

Question about Whirlpool Washing Machines

1 Answer

washer Drain and spin is in the same direction on these washers. It won't spin with lid open. Newer models won't spin or wash either with the lid open. Basically the lid switch has a green ground wire

Question about Kenmore Washing Machines

1 Answer

...lid switch in there to prevent folk from grabbing or messing around with them clothe while that washer is in full blast. To get to them lidswitch yall need to flip up the console and expose the ...

Question about Kenmore Washing Machines

1 Answer

...washer to wash but no spin with the lid open. Newer models won't allow for wash or spin. After you remove the case you will notice the lid switch quick connect has 3 wires. 2 hot wires and a green ...

Question about Whirlpool Washing Machines

2 Answers

...washer will not agitate or spin. Is there something I can do to further narrow down the problem and get this fixed? It sounds like it may be a coupling issue. Follow the link I attached for ...

Question about Whirlpool Washing Machines

1 Answer

...washer will run if that lid switch has failed. I have written a short essay on the 4 most common failures of this wonderful machine and included 4 videos and a service manual Mr Patel. Once you have ...

Question about Whirlpool Washing Machines

2 Answers

...washer with the case off to look for noises and leaks. Pop the clips off the pump and see if anything is in it if the lid switch proves to be ok I have a service manual and videos here How it works ...

Question about Maytag Washing Machines

1 Answer

washer, will fill with water, wont spin or agitate, power is good Easy fix. Lid switch is bad. This is a direct drive machine. Older models would wash but not spin these latest babys won't wash or

Question about Kenmore Washing Machines

1 Answer

washer Barrel -ok, your tub is full of water, check the lid switch. If it is not the problem you will have to give more information........To get at the lid switch you have to rotate the control panel

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

2,460 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...