Whirlpool Ultimate Care II LSQ9549L Top Load Washer "remove motor" Questions

Ad

Question about Hotpoint Washing Machines

1 Answer

...motor,, remove earth wire. Remove 2 bolts holding motor to drum, lever motor away from you to remove. Brushes are located at the end furthest away from the pulley. There has been more than 1 type of ...

Ad

Question about Bosch Washing Machines

1 Answer

...remove motor from bosch wfo 2867 washing machine@? Remove back panrl. Remove drive belt, remove 2 10mm motor bolts. Turn machine upside down. Remove bottom cover. Disconnect power lead to motor, ...

Ad

Question about Whirlpool Washing Machines

1 Answer

...motor. Remove two screws on clips for motor. Puy off two clips. Remove wiring harness off motor and remove motor. You now have access to motor coupler. Pry coupler half off motor and half off of ...

Question about Whirlpool Washing Machines

1 Answer

...of console lift console up remove lid switch plug remove clips each corner remove cabinet remove clips on pump remove 2 screws holding motor clips on remove motor clips remove motor and there it ...

Question about Hotpoint Washing Machines

1 Answer

washer. Remove earth wire, and unplug motor socket. Remove belt and remove 2 bolts securing moor. holding moior, lever motor towards rear, and remove motor from washer. Change the brushes in the motor

Question about Bosch Washing Machines

1 Answer

...Remove rear panel, remove drive belt. Unplug motor lead, undo 2 screws securing motor. Lever back motor with screwdriver, remove motor..Carbons at opp end to motor pulley, remove and replace

Question about Bosch Washing Machines

1 Answer

...remove motor? thanks Remove rear panel of washer. Undo 2 screws securing motor to tub. Pull motor plug from terminal block. With a screw driver, or similar, lever back motor, keeping hold of it , and ...

Question about GE Washing Machines

1 Answer

...in place wiyh 4 3/8 nuts underneath the motor remove the motor .The clutch is held in place with a spring clip at the end of motor . Remove clip Now the clutch should come off thanks for the ...

Question about Whirlpool Washing Machines

1 Answer

...motor-shaft,then remove 2 screws on the motor and then the 2 clips holding the motor to the transmission,then pull the motor out after unplugging the motors plug and disconnecting the motor ...

Question about Hotpoint Washing Machines

1 Answer

...motor, remove earth wire.to motor. Locate and undo 2 screws securing motor to drum chassis. Lever motor backwards to remove from mountings, keeping hold of the motor so it does not drop. Remove old ...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

2,460 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...