Whirlpool Ultimate Care II LSQ9549L Top Load Washer "faucet spins around" Questions

...drain? Verify that the water inlet valve screens are not clogged and that the hot and cold water faucets are both turned on. Check for any kinks in the water inlet hose. Remember that the washer ...

...is either broke or cracked. Or follow this easy steps... Unplug the washer and turn off the water faucets. Disconnect the water hoses and the drain hose and pull the washer away from the wall, ...

...faucet in the house to make sure that household water pressure is adequate. ? Make sure that the plug is plugged securely into a grounded, 3-prong, 120-VAC, 60-Hz. outlet. ? Reset circuit breaker or ...

faucet if the water isn't warm. Also clean the filter screens and make sure that your hot-water heater isn't out of hot water.4 Make sure the faucets are on, the filters are clean and that the

...faucet fixtures and on the back of the washing machine. Sometimes a loose connection is the cause for the leaks. Tighten couplings and hose clamps if necessary to fix the leaks. 4 Replace internal ...

...faucet or to the water inlet valve. In the simplest case, you may simply need to tighten the hose slightly at one end or the other. A pair of pliers can be used to tighten the hose fitting, but be ...

...faucet or to the water inlet valve. In the simplest case, you may simply need to tighten the hose slightly at one end or the other. A pair of pliers can be used to tighten the hose fitting, but be ...

...cycle. Select DRAIN/SPIN if there is excessive water in the washer.Turn off the water supply at the faucets, which are usually recessed in a square compartment in the wall behind the Kenmore Elite ...

...spins/drys. I think this is my only option- because when i turn the dial to very dry the lights go on SPIN and DRY which I think is still putting water on it. I thought DRY was just Dry. thank you in ...

...around the first time). The DOOR LOCKED light is on throughout the wash cycle. The spin cycle seems to work fine. When we first bought the machine, we used HE powder and no conditioner. Later we ...