bleach dispenser are no longer working. Any Ideas? Sounds like the lines are clogged.Soap and softener leave residue that over time will build up and clog the machine.It is not hard to fix but it does
...bleach dispenser water valve. Did you hear the Solenoid hum? If so and you have no water flow diverted to the Softener dispenser the solenoid valve may be stuck closed. If you did not hear the ...
...dispenser drawer and 2/3 cup (160 mL) of liquid chlorine bleach to the bleach compartment. DO NOT use more than 2/3 cup (160mL) of bleach per cycle as this will lead to product damage. 3. Close the ...
Question about Whirlpool Washing Machines
...into the "bleach dispenser". My whites are still not coming out as white as they did with my top loader. I like everything else about this machine, but am really disappointed with this one
...Dispenser trays have a narrow hole at the base of the unit.. this is most likely blocked with gunge... pour bleach into outlet and push a straw through to clear obstruction. Once cleared take drawer ...
Question about Whirlpool Washing Machines
...dispenser will not empty. The bleach and washing detergent compartments empty but not the softener. I have tried cleaning all the compartments, making sure all holes are clear. Also ran the Sanitary ...
Question about Frigidaire Washing Machines
...dispenser drawer completely out and dump out the remaining water and fabric softner. I know that some water is normal but most of the time the fabric softner section is FULL of water and softner mix. ...
...wont spin Washer does everything, except spin. Tub spins freely by hand, but is locked up during washing and won't spin. Agitator works fine, fills, drains... everything except spin. Sears tried to ...
...bleach in the wash tub. Some newer models actually have a "Clean Cycle" available now just for this purpose. This helps keep the wash tub, drain lines and pump sanitized. CHECK AND CLEAN THE DRAIN ...
...dispenser drawer during rinse cycle. Clean the feed pipe in case there's dirt in the feed gauze located at the back of the machine. The mould on the rubber is dirt in the machinme. A mixture of 1 cap ...
2,460 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
1,413 Questions
1,373 Questions
429 Questions