...agitator to replace the dogs? remove the fabric softner assemble.if ther is a plastic cover remove it remove 1/2 bolt and reach down under agitator up. put agitator on the floor.put a foot on both ...
...agitator dogs are worn and need to be replaced. To do this remove the agitator cap and the bolt that holds down the agitator. With the bolt out you can remove the top section of the agitator (auger) ...
agitator dogs. If neither half are working, you might be having transmission issues. To change the dog kit, re,ove the top cap on the agitator and locate a 7/16" bolt. Remove the bolt and the agitator
...agitator dogs" under the agitator, and if they are stripped, it's easy to replace them, but the agitator will spin both ways if turned by hand. There is a bolt that holds the agitator in. Remove it, ...
...the agitator, bottom is fitted to transmission shaft. You pop the top cover, remove the 7/16 bolt and both halves together to change dogs of agitator. Pull halves apart to change dogs. Fairly
...agitator dogs) this will give you a better view at what you are looking at. If this is a Whirlpool manufactured top loader, the problem may be a worn agitator cam assembly, worn agitator dogs, loose ...
...agitator dogs inside the top of the agitator, they are bad for wearing out, sometimes the agitator may only agitate one way when the dogs are worn out. This is an instruction sheet that came with the ...
...agitator dogs have worn down and arent catching any longer this youtube video will show you how to remove agitator/replace dogs them reinstall the agitator http://youtu.be/0GQh8JLqVv8 The agitator is ...
...agitator dogs check THE CAM DOGS INSIDE THE AGITATOR, AS THEY WILL HINDER THE AGITATION PROCESS. However in G.E models the cam dogs are replaced with what is called an agitator coupler. (located at ...
2,460 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
1,413 Questions
1,373 Questions
429 Questions