Whirlpool LTE6234D Top Load Stacked Washer/Dryer "thin twin water pump" Questions

Thin Twin Washer - does not drain water. I have replaced lid switch and water pump. MAKE SURE THE CONNECTION ON THE TOP PANEL FOR THE LID SWITCH IS GOOD. ON OCCASION WHEN THE TOP PANEL IS SLID BACK IT

...thin twin wont drain. Checked drain pump and it was clear. When i got all the water out it would spin. It will fill, agitate and spin(as long as there is no water) The basket drive and or clutch need ...

...Twin Thin - Water Leak There is a leak coming from the front center of the washer and it seems that I have to remove the dryer on top to loosen the top cover of the washer and remove the front cover. ...

...Thin Twin Stopped Spinning at End of Cycle, H20 Will Not Drain I own a stacked Whirlpool Thin Twin Washer/Dryer Combo. Yesterday I did a load of laundry, and the load abruptly stopped in the washer ...

thin twin model LT7000XVNO washer won't spin Puddle of oil on floor and think Transmission needs replacing. Machine is old but very reliable. QUESTION #1. Is it worth changing transmission on this old

...Thin Twin stackable washer/dryer. I just finished replacing the "water pump" because water was leaking at the front of the machine near the bottom. The replacement pump worked great ... ... the leak ...

...Thin Twin washer/dryer combo. It has worked fine for several months (I'm renting this apartment so I don't know if it worked well before that) but today when I went to put the clothes in the dryer I ...

Thin Twin model LT7000XTNO and the water will not drain after the wash or rinse cycles. I have tried it in each of the different settings (normal, permanent press etc.) Could it be the lid switch? The

...Thin Twin. everything seems to work fine except when it gets to the rinse cycle it stops and does not drain. is it the switch or water pump? also where is the model # located on this ? most likely it ...

...thin twin stacked washer/dryer and the other day i noticed water leaking out of what appears to be the pump, seems to be where the shaft passes through the plastic case. are these fixable??? ...