Question about Whirlpool Washing Machines
...thin twin dryer starts and stops after 5 seconds Hi, I have a whirlpool thin twin stacked washer dryer. I'm having trouble with the dryer. Either the dyer won't start at all or if it does start it ...
Question about Whirlpool Washing Machines
...thin twin.. The cold water trickle in. Take forever to fill then it stops altogether without advancing It sounds like either a faulty inlet valve/solenoid or something is restricting the water flow ...
...thin twin washer will not drain. It stops at any point when it is to drain water (prior to rinse cycle, following the rinse). It makes a small click sound and stops running. This can be solved by ...
...thin twin washer stops in the wash cycle for a few seconds and starts again is something going bad This is probably normal. There is a natural pause between agitating and draining, and again between ...
Question about Whirlpool Washing Machines
...Thin Twin WET3300SQ (water stops coming in) Hi, Model: Whirlpool Thin Twin WET3300SQ model (stackable washer/dryer, about 7yrs old) I was washing clothes on the weekend, and the water was coming in ...
Question about Whirlpool Washing Machines
Thin Twin YLTE5243DQ1 won't stop spinning after rinse cycle. My Whirlpool Thin Twin washer works fine until it gets to the spin cycle at the end of the rinse (not the final spin) it spins up fine, but
...thin-twin stopped working with water in it when I stopped it at the rinse cycle like I usually do.When I turned it on again it did not come back on in any cycle. please help me. Try this: ...
Question about Whirlpool Washing Machines
...Thin Twin Stopped Spinning at End of Cycle, H20 Will Not Drain I own a stacked Whirlpool Thin Twin Washer/Dryer Combo. Yesterday I did a load of laundry, and the load abruptly stopped in the washer ...
Question about Whirlpool Washing Machines
...thin twin washing machine will not advance is this the timer or could the lid switch cause this If it stops after pumping out, and before spinning, it is likely the the lid switch. Test the switch ...
thin twin model. The cycle stops at spin and water stays in the mashine. When it gets to the SPIN cycle,wait 45 seconds. If it does not spin,open then close the lid. If it spins then,replace the timer
341 questions posted
Usually answered in minutes!
9,125 Questions
2,624 Questions
2,038 Questions
1,413 Questions
1,373 Questions