Whirlpool LTE6234D Top Load Stacked Washer/Dryer "change switch tub" Questions

Ad

Question about Washing Machines

1 Answer

change that would send the proper message to the washer??? A defect in the water-inlet valve may mean that it's no longer able to shut off completely when the electricity has been turned off to it. If

Ad

Question about Kenmore Washing Machines

1 Answer

...change the water lever switch, of coarse before changing the switch make sure the rober tube of the water lever switch that connect to the tub is connected at both ends and/or that it is not damage, ...

Ad

Question about Whirlpool Washing Machines

1 Answer

...switch, helped for a day, changed it again, same...So then i did a diagnostic test. it said that it was the main control board,changed it ($135), didn't help. I noticed that was a little bit of water ...

tub completely, but your pressure switch is not shutting the water off, you will need to confirm you have a good electrical connection, and that you do not have a small hole in the air hose somewhere.

Question about Washing Machines

1 Answer

...ghw9100lw2. During washing today the tub locked up. I could smell a "hot" smell. The tub will not spin at all, with or with the belt on. All other cycles work. Any ideas? Door Switch seems to be ...

Question about Kenmore Washing Machines

1 Answer

...change the water level which can be interupted by pushing in the timer knob. Lid switch does have an audible 'click'. This is probably a bad timer motor. Two screws on right/left of head, flip head ...

Question about General Washing Machines

1 Answer

...switch that senses how full the tub is. It does so using air pressure at the bottom of the tub -- air hose gets "pushed on" by the filling water and causes a pressure spike the switch. If you develop ...

Question about Washing Machines

1 Answer

switch does nothing to change this malfunction. Some water may have got into the pressure switch. Remove the pressure switch and see if you can shake any water out. Make sure the cables go back on the

Question about Washing Machines

1 Answer

...portion it just sat there but when i switched to warm rinse tub filled again. souds like the cold valve has gone get and expert in to change it or change it yourself you can get parts from ...

Question about GE Washing Machines

2 Answers

...switch. The pressure swtich senses the change in air pressure as the tub fills and shuts the water off at the selected level. The following link explains: ...

Not finding what you are looking for?
Whirlpool LTE6234D Top Load Stacked Washer/Dryer Logo

341 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...