you have changed the setting on the base station and that did not work, power your base station off completely and try again if that does not work you have an out of box defect and need to exchange it
...base station isnt plugged into the mains, ensure you have the base station plugged into the power and the phone line from the wall socket is plugged in, the base station controls all the handsets, if ...
...base station. I have not lost contact with base station hence your remedy is not applicable, all I wish to know is how to get the incoming ring tone back. ...
...does not ring on base or on headset I have a customer who is telling me that the phone nore the base station are ringing. any suggestions? yea this might be due to signal problem in the phone ...
...base station rings very loud and cannot find where to either adjust or discontinue the ringer. Jackgee1 I found my owners manual and to adjust the ringer on either the Base Station or Hand Set as ...
...rings but no caller ID. Sounds like someone unplugged the power on the base station, or the power supply failed on that base station. Do you have a spare power supply? Is there power at the
...base station. Searching is blinking in the screens. Power is on to both mobiles. both blink serching cannot figure out how to coordinate they do not ring nor do they have dial tones. Base station ...
base station If you want to be able to ring the base station and get messages then that is a more complex answer and requires information like what cordless phone you are using, what model make etc as
Question about Uniden Lands Phones
...base station into a different phone jack somewhere in the house: if it works, the first jack is dead and will need to be replaced, otherwise try the folowing: Try using your base station at a ...
11 questions posted
Usually answered in minutes!
4 Questions
15 Questions
6 Questions
11 Questions