...For some reason I get the same error code every time we have a power outage. If you push and hold the "lower off" button for about ten or 15 seconds it will unlock and reset. Hope this
reset the breaker...neither worked. Replaced the controller with part #8301848 ...still same code indicators of E1 F5. Any recommendations on what needs to be done or replaced will be much appreciated
...to reset the controller. If the fault code appears again, the door lock/latch mechanism needs to be replaced. on the door the inside glass cracked. how do i take the oven door off to replace the ...
...Reset time and/or cooking operation 2. Check for proper ground F7Stuck function switch or button on Electronic Range Control (ERC)Replace ERC (Electronic Range Control/Clock) F8Failure Electronic ...
...code but the oven light is still on and the oven will not heat up. Unplug it for 10 min and plug back in. Go through normal setup procedures. I'm assuming it electric and may also have a reset. Hope ...
F5 Defective ERC Replace ERC F6 Problem with time keeping circuit Reset Time or cooking operation and check for proper ground F7 Shorted or sticking button Clean button or replace ERC F8 Defective ERC
...code the e1 error dode is due to the door being locked so to repair this you need to unplug the oven and leave it sit for at least 1 hour this allows for the internal reset feature to reset the oven ...
Question about Whirlpool Ovens
...code E1 F5 and wont go on What I know about this is that the board may be bad. Does the rest of the oven work ok? If you don't want to spend the money on it and it still works, you can clean it ...
...reset. If the error code returns, there a few different problems you may have. The door latch mechanism could be broken or shortedThe may be a pinched or shorted wireThe Oven Control Unit may be bad ...
162 questions posted
Usually answered in minutes!
281 Questions
282 Questions
135 Questions
112 Questions