Whirlpool RBD275PD Electric Double Oven "door display" Questions

...display If "LOC DOOR" is flashing in the display of your range or oven, and the self-clean cycle has not been selected, follow the steps below to reset your control: Motorized Switch With the door ...

door is open display should show ?0?. If the second digit on the clock display did not toggle, go to step B. If the digit did not toggle after replacing the door switch, go to step D. If the digit did

...has closed with the door open not allowing the door to close. Again this could be related to the display problem that you described. We can pass along part numbers with a complete / make model

...door and controls can be locked to avoid unintended use of the oven. The oven doors and controls cannot be locked if the oven is in use, or the oven temperature is 400°F (205°C) or above. The current ...

...display reads ''door'' and the oven will not heat. It simply reads door and begins to beep. It does this in bake mode clean mode and broil. Regardless of the position of the door lock handle it ...

...DOOR display on the screen. How do I get this DOOR code off? Replaced torsion springs (both) and 4450946 door frame. Now when I try to operate oven, I get a DOOR code on the display screen. what may ...

...display says door and now wont heat was cooking oven read pf now the light is on and the display reads door and now it wont heat up. The oven will not turn on the heat because it thinks the door is ...

after self cleaning,i noticed the lock light blinking,the door opens but when i try to use the oven dr is displayed on the screen and nothing functions. (Kenmore warm and ready drawer-self cleaning ov

...isn't. The door keeps on locking and unlocking, endlessly. Pressing any button for a normal oven function makes the display show the word "door". Located the switch - resetting fixed my stove as

door will not open and display has frozen went to stary pyroltic clean. Said door was not locked (but it was) pressed cancel. Door has remained locked and display simply says programme cancelled http: