Whirlpool GBD307PD Electric Double Oven "self cleaning locked door" Questions

...has cooled. if it is still locked, turn the oven to self clean and wait about a minute and then hit cancel and see if the door unlocks. if not, there may be a probelm with the door lock mechanism. ...

...go on when I set them to self cleaning and lock the door what should I do the cleaning light and the lock door latch doesn't work when I set them to self cleaning and lock the door what should I ...

...self cleaning oven, FGF355CGBF, gas range. Open the door. In the upper left corner, press and hold the door switch (the one that controls the inside light). Start a self clean cycle and wait for lock ...

...self cleaning When the self clean cycle in engaged, the oven door locks but after about three minutes, the 'f9' , message comes on, self clean stops and the oven door unlocks. The technician tried to ...

...self cleaning but after message: cln door comes message, E1-F5- . door does not lock and cleaning can not start. hi there, does the door lock work when you are baking in it the oven? it's highly ...

self cleaning,i noticed the lock light blinking,the door opens but when i try to use the oven dr is displayed on the screen and nothing functions. (Kenmore warm and ready drawer-self cleaning ov after

...self cleaning cycle oven door stays locked and cannot open oven door My oven door stays locked , when I press the clear button I get F1? I hold the clear button for a few seconds and still nothing. ...

door. Set the self-clean cycle again and only allow it to work for 15 minutes. Cancel the self-clean cycle and allow the oven to cool. Gently try moving the door lock lever (is so equipped) or opening

...self clean code F9 door wont lock Hello there: F9 Problem with door lock circuit such as pinched wire between Electronic Range Control (ERC) and door lock switch Check wiring and test operation of ...

...self cleaning cycle. Unplug power cord, and allow the oven cooling down for few hours. If the is still locked, then the high temperature generated in self cleaning cycle may have damaged the door ...