Keurig B50 Coffee Maker "pot turn" Questions

...pot) button turn the main power button in back to on. Once the red light flashes over the Brew(full pot) button release it, then press it once to start the brew cycle. Let it flow until desired level ...

...element should not have anything to do with triggering the second pot. Turn off the coffee maker, change/refill the coffee, refill the reservoir and turn the pot back on. This works on my

...turn on when I plug it in. There is no visible damage and I have never had a problem operating it before. If it will not perk or even get warm, the main heating element (usually in the middle of the ...

turn it on. Put an empty coffee pot under the brew basket and fill another empty pot with clean cold water. Pour the water into the coffee maker. If water comes out then you can plug it in and turn it

...pot is plugged in. Should the coffee get to cold the thermostat will turn the main heating element back on until it is back to 190. This system was developed by Farberware and a lot of makers copied ...

...Turn the pot BACK ON and brew the remaining solution. When brew stops turn OFF coffee pot, empty the solution, and discard the paper filter... Refill reservoir with cold water and turn ON; you may ...

...turn on bunn coffee pot has been turned off for several months it will not turn on now. You should check to insure that the tank inside the machine is full of water. Pour in 1 pot of water at a time ...

... this continued until I unplugged it, and also the light to indicate it was done never came on Your pot needs a keep warm element. the main element works ( perks and perks) The thermostat works ( it ...

...pot Check programming.This is very simple;turn switch on and hold brew switch until you here 3 clicks to start brew timer .When desired level is reached turn off on/off switch on front panel to set ...