Whirlpool SF379LEKS Gas Kitchen Range "e2 f1 error" Questions

...f1 e2 with code f1 e2 my burners wont unluck do i change the clock thank you F1-E2 - UL A/D Error(s) - Disconnect power for at least 30 seconds and then reconnect. Allow at least a minute after power ...

e2 f1 and beeps every so often after using the range, it produced the code E2 and F1 AT THE SAME TIME WHAT DOES THIS CODE MEAN? THANKS [email protected] F1 E2 1. Verify failure if not displayed, using

F1:E2. I reset the clock and the same thing happens a few hour(s) ot day again. could i get a more complete mod num on this range my tech data shows no f1 e2 code f1 is usually the eoc there should be

...f1 e2 E2 F1 - UL A/D error(s)1. Disconnect power longer than 30 seconds.2. Re-apply power and observe for longer than 1 minute.3. If failure remains, disconnect power, replace control.Here is the ...

...e2 and f1 mean? Here is what the manufacture says about it, my comments are below. F1 E2 - UL A/D error(s) 1. Verify failure if not displayed, using CANCEL/OFF key. Press key for 5 seconds until last ...

...code E2-F1 mean? E2 F1 - UL A/D error(s) 1. Disconnect power longer than 30 seconds. 2. Re-apply power and observe for longer than 1 minute. 3. If failure remains, disconnect power, replace

...F1:E2 F1-E2 - UL A/D Error(s) - Disconnect power for at least 30 seconds and then reconnect.Allow at least a minute after power has been restored and if error code reappears, replace control board ...

...f1 e2 code oven not working F1-E2 - UL A/D Error(s) - Disconnect power for at least 30 seconds and then reconnect. Allow at least a minute after power has been restored and if error code reappears, ...

...F1 E2 Hi Headcl F1 E2 fault code is an error on the control board of the stove. By disconnecting the power from the unit for about 0.5 to 1 minute and then reconnecting the fault may go away after a ...