Whirlpool WED5300S Electric Dryer "thermostat clicks nothing happens" Questions

Will click when I push the start button but nothing happens Check all the thermostats on the back for continuity.

Thermostat as well and the Oblong white thermo fuse on the blower side. The dryer started and ran fine for about 4 loads then quit. All the lights are lit, The board shows "Sensing" . I turned off the

...nothing changes. there are 3 things i find on lg dryers that can cause that. one, main control board would be worse case relay on ctrl board may be stuck causing clicking noise. 2nd, you could have a ...

...clicks once when I press it. If I wait the dryer to cool down (the dryer does nothing during the cooling down phase as well, so I just wait for one-two hours) then it starts again, but again stops ...

...nothing occurs. I've been told it could be the thermostat, cut-off or element. I cant take the back panel off of the dryer. Do I access these parts from the front. There is front bottom panel, but I ...

...thermostat clicks to turn heating element off, the sounds ramps down to nothing in 5-10 seconds. When thermostat clicks to turn heating element back on, the sound ramps up again in 5-10 seconds. I ...

...nothing Check dryer Terminal block prongs both outside prongs should give combined 220, and 110 each if u check 1 outside & 1 center (ground) prong. Also check house electrical outlet for full ...

...nothing happens. I checked the dryer door, and the power from the wall and both are fine. About a month ago my mom learned about dryer fires and cleaned out the dryer. I am not sure if maybe she ...

...nothing happens. I've read to check the thermal cut-off switch and probably replace it and the thermostat. The door switch seems to be ok, and the belt hasn't broken. My problem is that I'm not sure ...

...nothing is moving go to the back of dryer,remove the back panel,look at blower housing and you see a white thermostat like part with 2 cables. that's the thermofuse. use a multimeter on ...