Danby DDR586R Dehumidifier "lubricate" Questions

...annoying. Disconnect it, (DO NOT REPAIR WHILE CONNECTED), remove outer plastic casing (screws), lubricate moving parts with a little WD40 or similar. Re-assemble. If you can get to the part

loud noise The fan is making a very loud noise when working. I've opened and cleaned the product but the noise has not subsided. Help! try to put some lubricant to smooth the work of the fan

fan is noisy at times Do clean out the dust as this tends to cause the fan to become unbalanced. You may also consider lubricating the bearings. For oil I prefer 100% synthetic which is easily ...

how to lubricate a gold star dehumidifier? 48AD38D Not well up on the model, but if closed system using a compressor, not needed, oil is in the system

Just bought new dehumidifier but by mistake carried it on its side for 30 mins.can it now be damaged ? After 18 hours in upright position it is not been turned on yet. I would be surprised if the ...

MY DEHUMIDIFIER COMPRESSOR SOUNDS LIKE IT IS RUNNIN BUT, THE FAN WHEN ENERGISED IS TIGHT & WILL NOT RUN. WHEN NOT ENERGISED THE FAN SPINS FREELY. SHOULD i REPLACE THE FAN MOTOR??? Definitely ...

The unit turns on compressor and the fan after awhile the fan turns off and compressor still on. Sounds like it is a bad fan or bearings. Try shutting off the unit as soon as the fan shuts off and see

...Is this a expensive repair? The unit is only a few years old. the motor is tight, (can't turn) lubricate the motor bearings with light machine oil. retest. rust causes this. the motor "tries" to ...

Compressor runs but fan will not come on. I have checked the switch and it works. I have also checked the power coming out of the control board going to the motor and there is continuity. How do I ...