Whirlpool WED5900S Electric Dryer "won hot" Questions

hot afternoon but then won't go off even after dark when it has cooled down nicely. I have to climb up there and turn the thermostat up to make it switch off. Once off, I can set it back at 90 and

dryer won,t get hot how to locate circiut breaker for a dryer that's not blowing hot It's not a circuit breaker your chasing. Check your vent to see if it's clean. You could have a bad element.

my cloth dryer won't dry. It is not hot. my cloth dryer won't dry. It is not hot. is it gas or electric, vent could be clogged. could need starting device. solonoid, or ignitor.

...won't get hot kenmore gas dryer won't get hot gas--- glo bar that lights the gas is bad or the vent to the outside is clogged electric-----wire may be burnt off the heating element or ...

...won't get hot That means no power is getting to the gas assembly. The number one suspect would be the fuse which mounts directly on the blower housing right next to the control thermostat. ...

won't start. When I hit the power button all the lights come on normal and I can even change the cycle but when I hit the start button.....nothing! I was using it load after load did it get to hot

...stops using hot air. Also won't stop running. Cleaned out link, checked venting...no change. The coils on the gas assembly get IFFY with age. They work a little then get hot and quit. My ...

...hot air. How can I find out why the drum won't turn? If you have the belt down in the groove on the tub it won't work. The belt slick side goes to the drum and goes back like this:I recently ...

...won't come on. the heating element is hot though. For about a week when we pushed the button it would make a buzzing sound. Now it won't come on at all. what could it be? Most likely your ...

...hot. I cleaned the lint trap and the vent on the back, neither of which were clogged, but my dryer still won't dry!!!! You will need to check all the duct work for lint buildup. This is the ...