Whirlpool RF367 Electric Kitchen Range "burner switch" Questions

...burner switch should disconnect both legs of the 240 volt circuit, one leg through the # 2 terminal and one leg through the thermostat built into the burner switch. Disconnect the pilot lamp wire on ...

burners, off for right burners) is by design. The high-speed fan has two switches; 1) the primary switch visible centered between top two knobs, 2) secondary switches integrated with left burner knobs

...burner switch, when turned to ignite, will cause a spark to go to ALL the burner igniters at the same time. Just watch the next time you turn one of your burner switches on, and you'll see a spark at ...

...burner switch, spark module or wiring in that circuit fails, the spark electrode won't work, and as a result the gas burner won't light. If those components work but the electrode won't spark, the ...

switch for that burner or the burner needs to be replaced. If you are able and it is possible, inter change switches to see if it makes a difference. Interchange Large with large, small with small. If

...burner doesn't switch between small and large Hello - I have a GE JBP78W oven/cooktop with one burner that can switch between a small or large size functioning burner. I cannot get the burner to ...

burner switch being no good? When you turn the switch on, the surface light comes, so i assume that the switch is getting power. I am baffled on what can still be wrong Good morning,if you've replaced

...burner arced out it probably also ruined the switch. Most switches on a standard electric range have 5 wires. 2 wires to the burner. 2 hot wires from power and a smaller wire which connects to the ...

burner switch. If you turn one of the other burner switches to make the spark modules spark look and see if the electrode is sparking at the bad burner. Most of the spark modules send a spark to all 4

The indicator light is wired directly from the infinite switch (burner switch). This mean one of the switches has a shorted switch. So Did you have an issue with one of the burners? I hope this helps