Accubake system, oven is controlled by the display unit, dispaly unit worked fine one minute then out the next I would have to say that u need to remove the back painl and look for a ground wirer that
...a whirlpool gold accubake oven the says it is locked but the door opens and when i press a button it beeps twica and displays E1-F5 and the oven does not work. The Door Lock Switch is bad. Replace
Question about Whirlpool Kitchen Ranges
...display shows "Loc" and the oven will not work. It earlier displayed E1 F5 and the door would not unlock. I unplugged the stove and plugged it back in, and the door openned. Now it displays "Loc" and ...
...Accubake oven display. If I press cancel it sometimes will start but has been working less and less. The range is quite old and I do not have a manual. What does the error mean? Shorted keypad (also ...
Whirlpool Gold Accubake Range "Loc" with a symbol of a lock appears on the display:Oven does not work HELP! try holding down the start button for 3 seconds
...AccuBake Duo and the top works well but the oven cannot be turned on. It says in red letters " LOC" to the left of the time display. I am not sure what to do. The warranty expired by now but I cannot ...
Question about Whirlpool Kitchen Ranges
...accubake oven On the display panel, my bake button works on and off, same for temperature, they work at times and at times don't. The rest of the panel works fine You will need to replace the ...
...accubake glass top stove. The top of the stove works fine but the oven will pre-heat .. error out (message: EO .. -F2-) and lock. I've taken the display out and cleaned everything out and it ...
...accubake gas range. The code PF is displayed as well as the time on the clock. However there is power to the unit but none of the oven controls including trying to change the clock will work. Have ...
75 questions posted
Usually answered in minutes!
179 Questions
87 Questions
81 Questions
70 Questions
69 Questions