Nikon N6006 35mm SLR Camera "not film" Questions

...the sprocket. 4. Now close the back door and the film should load automatically and# 1 should appear in the frame counter, and if it does not then the film is not loaded properly. Glitters Film ...

film and not the camera. Everything is fine. If the problem persists, take it to be repaired. If the film was stuck in the middle, load it again into the camera. With the lense cap on (preferably in a

...film is not loaded properly. I hope this helps! Sincerely, Allan Go Ahead. Use Us. OMG YES! ive been searching how to put film in my camera and, of course, GEEK SQUAD KNOWS HOW!!! thank you : ) this ...

film (do not touch the film over the shutter, advance the film. It may be that you are putting the film on the takeup spool incorrectly. Watch how the film advances on the spool. If it is on the spool

film is not advancing a couple of things could be happening. When you close the back door it is not engaging the film to hold it against the take-up spool. If so then that needs to be fixed. The other

...the way to the receiving spool. There's an 'eye' inside the film compartment to check that the film is loaded. When the film is not correctly loaded the camera thinks it's empty and rewinds the

...film transport signal not visable on Minolta Dynax 404si? film transport signal not showing up If it will not work on any roll of film and you are sure the film leader loaded correctly and the film ...

...film cassette and will not be damaged by the light ingress. However, your camera is behaving strangely. I would check that the electrical contacts where the film cassette goes in are clean. You can ...

film is not developing There is not any in camera developing. This is not a digital camera it is a film camera wherein we put a film cartridge with a specified number of shots into the camera then ...

...not accept film. I added a new roll of film and it says there isn't any film in the camera. It worked fine the last time I used it.. New battery, turns on fine. It sounds like it is trying to accept ...