2002 Mitsubishi Montero Sport XLS "ac pressure switch low jump" Questions

...ac low pressure to get my ac compressor to come on. How do you jump a low pressure sensor for the ac system. If you look on the low pressure side of the AC system you will see a plug that is ...

...AC low pressure line signals the PCM (computer control) to close the AC compressor relay and raise the idle speed. If the system is low on refrigerant charge the relay will not ...

ac systems pressure and it was fine at 55lbs. I replaces the fuse, relay and low pressure switch and the clutch/compressor still wont turn on. I by passed the low pressure switch by putting a hot wire

...ac reley @pcd and power up compresser blows cold check the low pressure switch on the accumilator yep, low pressure switch on accumulator. sometimes the low and hi pressure switch are the same. check ...

...pressure is good. checked fuses, all good . checked ac clutch fuse under hood . ok. replaced ac breaker switch. Check the low switch by the dryer or accumulator, its a long narrow cannister, it will ...

dash. Power then goes thru the high pressure switch to the compressor. The ac relay is grounded to the body. Do you have power on the lite and dark green wires going into the relay and is it grounded

...ac works fine, nice and cold. checked the low pressure switch, it is working... I push the dash switch, a green lite comes on, but no ac. Did you check the relay to see if it is getting power and ...

ac system has pressure switch should have pwr going in then out the other side(usually only two wires at this switch), try jumping switch to see if clutch engages. still need gauges hookd up to b able

AC position. Is the low pressure switch in a closed possition. Does the electro-magnetic clutch on the compressor have the proper esistance. (don't remember just what it should be, but if there is

...ac clutch relay. Did a by pass on the pressure switch. Nothing helps. Terry, have it checked for low refrigerant at a good shop. "I hope this helped you out, if so let me know by pressing the helpful ...