Whirlpool RF378LXKS Electric Kitchen Range "replacing bottom drawer oven" Questions

...drawer and bottom of the oven door. Sweep the spatula or ruler side to side. Once you feel the obstructing utensil, attempt to slide it with the spatula or maneuver the spatula over the top of the ...

...of the oven or pull out the oven burner (to which the igniter is attached)? Thanks in advance. Depending on model remove burner assembly or thru bottom drawer and remove ignitor from burner

...stove top burners work ,but oven won't it's gas with electric ignition The glow bar for the bake burner is bad, needs to be replaced. Remove oven bottom to get to it, and also the utility

from the hinges. Remove the pan drawer on the bottom. Remove the spring from the hinge to be replaced. Remove the hinge mounting screws. Remove the hinge. Reverse this process to install the new hinge

...drawer removal or the bottom of the inside of the oven? Thanks, Sam There should be two screws at the rear of the bottom panel inside the oven. Remove those and lift out that panel. The element is ...

...removing the drawer at the bottom, If it glows it's likely that the ig-niter is still bad. over time they get old and they do not get hot enough. you should replace the ig-niter. Hope this helps! ...

...igniter comes on and glows, and gas starts to flow, but shuts down after a short time? What is the complete model number? Look inside the oven door area or on the bottom storage drawer, if it has

...10 mins ago.... Works like it's brand new. You have to remove the bake pan in the bottom of the stove, remove the drawer, and the sheet metal shield protection the connection. Entire job was 10

...than 4ohms. New part through local app. parts store.- 50-75$. Ignitor is mounted next to burner under bottom pan in oven. Plug is behind pan drawer. Fairly easy to replace. hope this helps- Thanks- ...

...removing the drawer at the bottom, If it glows it's likely that the ig-niter is still bad. over time they get old and they do not get hot enough. you should replace the ig-niter. Hope this helps! ...