...followed the instructions to the letter? Please recheck your connections. If you continue to have this trouble, you may have a faulty switch. Thank you for posting at FixYa.com ... please vote thanks ...
...switches. http://www.centralvacuumstores.com/meta/pdfs/info/744NT+Installation+Guide.pdf This is the Switch NuTone Broan recommends for that fan. ...
Question about Dryers
...(p1 of manual, below) For instructions on wiring see manual for example here NuTone 8663RP Installation Instructions Manual p2 ...
I have two fans and the remote works both in two rooms You have to change the dip switches on one of the remotes and on the fan that it controls. This will require you to remove the remote control ...
I just installed a hunter ceiling fan with a motor/dimmer control. The instructions said to set the speed at the highest setting before the instalation. Now that the job is complete (it works fine) ...
Question about Dryers
...switch on and the light comes on. There are two pull switches one pull for direction and one pull for three speeds and off. Check your wiring from the installation instructions, the wiring in the ...
instructions for my ceiling fan! i have installed these so i can walk you through it. first if it has already been wired (properly). a wall switch or string will operate it. i suspect you should begin
...from the switch to the fan. The drawing shows the three wire as the source and thi is what is messing you up i think. I dont dare advise you any more untill i get my instructions out . Good ...
344 questions posted
Usually answered in minutes!
153 Questions
60 Questions
24 Questions
