Samsung 1.5 Ton Rotary Compressor 18k Btu R-410 208/230 V. 1 Phase 60 Hz new "cap start run wiring diagram" Questions

start current to sometimes blow the 30 amp fuses. I am replacing this single capicator with the dual cap called for but I don't have a wiring diagram telling me which wire is which.. Is there a wiring

...Start Cap The parts people were NOT helpful and wanted me to take the unit apart to find them better numbers. I live alone and can't do that. Hoping I have correct parts but I need a Diagram color ...

...cap called HERM. Herm stands for hermedtically sealed compressor. So both your commons and a hot wire go to C. You need one small brown wire which goes to F from the fan. One wire marked S on the ...

...cap to run and start on compressor condenser fan will be powered off the contactor, there really isnt much to be worried about with any diagram?  what specifically are you trying to figure

...cap to prevent any shocktastrophies) The black wire will of couse go to wher the old one did on the contactor. Read a little ditty I affectionatly wrote for further info entitled 'old motor had 3 ...

...be right or it wont run contactor has to be wired right. run cap has to be the right mfd and wired right are you working on something thats 230 volt single phase or 3 phase need more info to help ...

...start cap. I still have the same problem. I don't know if I have a bad circuit board or the wrong one. It seems the run circuit is the problem but I don't know. I also bypassed the high and low ...

cap, which supplies power to the fan as well as the start winding of the compressor. I suggest you contact someone who can read a wiring diagram to determine which one you have. All Makes usually have

cap to T1 on the compressor(start winding?) The parts house told me it does not take a star cap or relay The NEW compressor trys to start but trips overload after about 5 seconds,pulls near lock rotor

...cap please assist about wiring Your compressor is going to probably require at least a run capacitor wired between the start and run windings. You need to contact the manufactuer to determin the ...