Dayton (4LX41) Heater "air flow keeps blowing pilot" Questions

...air. I believe spiders/bugs/dust block pilot orifice when it is not in use. You can also tell that orifice is blocked when you don't get a good blue pilot flame with pressure behind it allowing the ...

...air compressor. The orifices inside the pilot are so tiny, you cannot generate enough pressure blowing with your lips to do any serious removal of dust, lint or foreign debris that may be partiallty ...

...air.THis has always worked far me.I need a phone number or email address to Pro Com because i'm having problems with a new one i just bought and I can't find the papework.Could you pleas eif you have ...

...flow to unlodge the debre. Re asemble and light. If this dosen't work It may be the pilot air intake is too open causing the pilot to blow itself out.If thats the case close off the air adjustment ...

...air flow pattern. As you can see I can just off the cuff give many ideas as to what your problem may be. You will have to sort through these or have the contractor come back and figure out what ...

...flow. The thermocouple generates just enough electricity to hold the safety coil open. Coil bad = pilot out. If your furnace is over 25 years old, there is a good chance there is a hole or crack. Is ...

...flow of gas and it's not enough to heat the probe that keeps the pilot flame lit. or the flame sensor is bad. it's rare to have the sensor go bad but it can. a can of air and blow it out good is ...