Question about Dryers
...electric fan purchased from Walgreen's; called "wind machine"; turned on fan yesterday and blades barely move. turned on Lasko electric fan and the blades barely moved is the motor getting hot? try ...
barely moves Three speed fan Barely moves at only ONE speed, slow! Fan is a few years old, but hasn't been used much. Does not have remote hi check if the fan turn freely if not then it is most likely
motor hums and blades barely move Trey oiling the bearing with sewing machine type oil.
...barely moves at all The switch is not good,when you put it on high it does seem to work because a wire going to the switch can be out of it,so you must take the switch out ,to connect the wire,Hope ...
barely moves and sounds like it is stuck or not enough power to move it. It worked fine at the last garage I tried it in. Tester showed 240 coming out at the outlet and 230 at the wiring in the motor.
Desk Fan needs a nudge to get started We have a desk fan that when plugged in does not rotate.You can hear the motor humming. If you give the blades a slight push the fan starts to move. The motor is ...
...moves air,installed westinghouse 6A125vac switch,same speeds,how can i get a comfortable medium speed? Howdy, Sounds like a good ol' American made Hunter Original to me. BEST and most powerful ...
...2 years then just stopped completely. I do notice that the red indicator light on the remote will barely glow for a second or two when a button is pushed. If you push the same or any other button ...
...barely moves and abruptly stops, the bearings are dirty and need to be cleaned and oiled with 10W non-detergent motor oil. A quick-fix is a tiny bit of WD-40 where the motor shaft (the rod that the ...
Hunter fan wiring Hi - I have a Hunter 9308R Ceiling Fan. It has a remote. I moved it from one room to another. There is a black, white, and bare ground wire from the ceiling. I wired the black from ...
232 questions posted
Usually answered in minutes!
18 Questions