Whirlpool SF368LEPS Stainless Steel Gas Kitchen Range "oven keeping temperature" Questions

...Oven temperature too hot Replace relay board, if present, or oven temperature sensor (RTD). Check sensor harness. F3 or F4 Shorted or open oven temperature sensor (RTD) Check sensor harness and ...

oven temperature sensor probe or an open oven temperature sensor circuit. The oven sensor probe will need to be removed from inside the oven cavity and tested with an ohm meter. The oven sensor should

oven temperature keeps dropping and takes too long to heat back up, it could indicate a problem with your oven's heating system. Here are a few things you can check: Check the oven's heating elements:

...oven temperature sensor or thermal fuse Replace oven temperature sensor or thermal fuse f3 falure code means oven temperature sensor or thermal fuse you have to check the oven temperature or the ...

oven at desired temperature. PILOT HAS TO BE RELIT CONTINUOUSLY TO KEEP THE OVEN GOING. This is a reoccuring incident. Why? Sounds like the pilot is mounted to far away from the burner. I have seen it

oven won't keep its temperature. I My Hotpoint gas oven won't keep its temperature. I turn it on to say 400, it preheats, beeps, I put food in, and then the heat seems to shut off, or drop down to say

...Oven temperature sensor (RTD) opened (upper oven, if double oven) Replace Oven temperature sensor (RTD) Note: Applies to all F3-E... codes. F3 - E1 Oven temperature sensor (RTD) shorted (upper oven, ...

...Oven temperature too hot Replace relay board, if present, or oven temperature sensor (RTD). Check sensor harness. F3 or F4 Shorted or open oven temperature sensor (RTD) Check sensor harness and ...

...Oven temperature sensor open Check oven temperature sensor, should be ~1100 ohms at room temperature. If too high or low, replace oven temperature sensor I tried to help you. Please help me and ...

...oven temperature above 615F-630F. shut down the breaker switch asap. If actual over temperature condition occurred: Look for welded relay contacts on bake or broil relays. If this happens, replace ...