Question about Vacuums
i have the candery hot dog roller and it turns on and heats up fine but when its gets hot the rollers stop they will not spin If your Candery hot dog roller is heating up correctly but the rollers are
...Step 3: Turn the vacuum belt lifter all the way clockwise until the belt drops down. Unlock the roller plate by releasing the two latches on the rear. Pull the roller plate up slightly and then ...
...remove the belt Most vaccumeing have 4 to 5 screws holding the bottom plate remove plate pull out roller . Slide it off the roller and motor replace with new belt by first slide belt around motor ...
The brush roller is not rotating on my Kenmore Whispertone. It will pick up on floor surfaces. Help! Be sure that there are no fibers wound around the roller or lodged in the wheel well of the brush ...
...the belt drive area causing beater to skip Hair,string, tinsel, etc. have always been problems for rollers and belts. You will have to remove the hair. It can often get stuck at the ends of the ...
oreck vacuum is smoking and the roller is not turning. vacuum is turning on and inflating well. Sounds like the roller is jammed up. The motor keeps driving the belt, but for some reason the belt cant
The belt for the maain vaccume broke off and now with the new belt the roller will not work. It sounds like your roller brush itself might be bad. Try holding the roller brush holding just the end ...
why the Dyson dc 41 roller brush will not turn? Vacuum has suction but the roller will not turn Try these steps: Check the button that turns off the roller brush to make sure you didn't press it by ...
HV9010P ROLLER BRUSH DOESN'T MOVE vacuum picks up fine with just the hose, when I attach the roller brush unit (pet attachment) roller brushes do not move, does not pick up anything...I found a ...
104 questions posted
Usually answered in minutes!
157 Questions
154 Questions
80 Questions
71 Questions
49 Questions