Whirlpool GS475LEKS Gas Kitchen Range "power oven ignitor" Questions

...oven/broil area? There are typically 2 types of electric glow bar ignitors; Round and Square. Ignitors are actually fairly easy to replace, removing 2 mounting screws and cutting/splicing 2 seperate ...

...oven electronic thermostat gives up and turns off power to the ignitor, so it never gets up to the temperature set on the knob. This is a theory of what might be happening as observed, but I don't ...

...spreader (both easy). The click you are hearing is the board relay sending power to the ignitor. The ignitor has to draw so many amps to open the gas valve. The oven is pilotless. Catriver..post

...oven on to bake you should hear a relay click on the electronic control (clock). You can do a couple of things here. If you have a ohmmeter the ignitor should ohm out at between 50 and 150 ohms. You ...

...oven does not work. Is this a pilot issue? I really appreciate the help, thank you !! If the broiler burner is not coming on it may be a bad ignitor or the ignitor may not be getting power. Observe ...

...oven stopped working...it still has power however the gas will not turn on in the range. The stove top burners work fine. Any suggesstions? Replace the oven ignitor. Hello, you suggest changing the ...

oven control, the igniter and the valve coil. As a properly functioning ignitor heats up, it allows more current to flow through the circuit. It finally reaches the point where it opens the gas valve.

...the bottom inside the oven,Sometimes it will glow but it dont let enough power through to open the gas valve. I would say its an ignitor issue. Thank You and please rate my answer if it was

...power from both. Is it possible that I purchased a bad ignitor? Are there other tests I should be doing to diagnose this problem? Any assistance would be apprecaited. The oven ignitor should have a ...

oven ignitor. Does the ignitor glow? If so, and the burner doesn't come on within 30 seconds, replace the ignitor, it's weak and not passing enough power to open the gas valve. If the ignitor does not