Whirlpool GJC3034 Electric Cooktop "change element" Questions

...change the 2 wires from a good element to that element. put the plate back in it is home and use the good elements touchtronic button to turn on the element. I am willing to wager that it is the ...

switch both elements on that side come on, just change the element assembly due to one element burning out Go back and recheck your wiring. It sounds like you have the burners wired in series together

Is it repairable? One of the large elements is making clicking and pinging noises and heating is intermitant. change defective element,,,confirmly ok

JENN AIR WALL OVEN ELECTRIC i have a jenn air and the broiler burned up and i replaced the element and now the oven does not heat neither does the broiler Are you sure the breaker didn't trip on one ...

...element works but the outer portion hasn't been working for the past week or so. Is there an easy way to fix this (like a fuse change?) or need I call a repair person? Thanks a lot! cf You will need ...

Jenn-aire downdraft electric heating problem I have changed elements and had an electrician out to check why the unit only heats to 273 degrees. The electrician assures wiring is correct; and changing

...the two white wire of the sensor then it's the problem. I have change mine with a generic oven temperature sensor and now my element work as new, cost 10-15$ depending where you buy the sensor

...oven and found a suitable height table, covered in news paper, slid the oven out of the unit, changed the element, all done in under an hour. If yours is under worktop then slide onto a piece

...change this because I won't miss lead you like that. Several tests need to be done to rule out a shorted element before the replacement of the control unit p#W10365424, most electronics are not ...

...change the terminal block. Solid elements and smooth top elements require raising or removing the main top to gain access. You will need to remove power from the range before lifting the main top. ...