GE 28112 Trio Cordless Phone "supplying power base" Questions

...base power supply from the wall, wait at least 1 minute, plug base power supply back into wall outlet. Reset remote by removing battery wait a minute, reinstall battery. If after the reset the base ...

...power supply of the base station is working correct? the cable from the power supply is not broken? and the cable from the power supply is inserted? Just a few questions, things I would start with ...

...base power supply would actually work fine with the satellite charger. . . probably because the satellite charger has less power requirement. Also, my system had some noise in the line prior to the ...

...power supply for the 8825 base is to be 13 volts AC, rated at 850 milliamps or higher. You can go anywhere from 13 up to 15 volts without hurting the unit, and a higher current rating is even better. ...

...BASE has the telephone wire from the wall plugged into it as well as the power supply wire) The remote charging dock has only the power supply wire plugged in and it cannot do the registration. Good ...

...rings but no caller ID. Sounds like someone unplugged the power on the base station, or the power supply failed on that base station. Do you have a spare power supply? Is there power at the

...base from the power supply and remove the batteries (only the base's, don't remove the handset:s batteries), soon, after a few seconds at most, the handset not finding the ...

...base and handset but removing their power supply/batteries and then reconnecting their power supply/batteries. You can also check and see if there is a registration option on the handset that will ...

...line connected. Check the power supply of the base station or its cable. When you are 100% sure the power supply is giving the correct voltage and enoug current I'm affraid the base station is

...batteries in base unit handset to no avail. Outlying handsets indicate "No link to base. Move closer to base. Try again." Check the power supply to the base unit This solution worked for me!