Uniden TRU9480 Cordless Telephone "unregister base unit" Questions

...base unit TRU9496. 3. On the TRU 9496 base unit press "Menu" then select "Registration" and press OK 4. You should get the message "press the # key on the remote handset". 5. Depress the "#" key on ...

...unregister all the handsets (except the handset you are using) enter the RC code* Once the menu is selected, enter the RC* code written under the base and press to confirm. Warning : If you wish to ...

...base unit Remove both batteries from the phone(s) wait 60 seconds Plug in base unit Replace batteries in phone(s) Press speaker icon on base usnit for 5 seconds Press menu Select adv adv settings ...

...base unit and i have no manual On you base between Clear and intercon push middle button, with erow push display base -ID On you base between Clear and intercon push middle button, with erow push ...

base unit TRU8866-if compatible? Compatibility of Uniden handset TCX905 with base unit TRU8866. Some sources say it is compatible & other say it is not. Can you confirm whether it is or not?Thank you.

...unregister a phone without its original base unit, so the handset is essentially useless. Is that correct?? Thanks, Mike They are correct - the phones are married to the original base and can only ...

select, select hs registration, follow directions on handset display, pressing mute on "new" base station, and ok on handset(plugged in). If you like, you can unregister with the "old" base unit first

base unit. Go to the base with your handheld. On the handheld menu, you can select "register". Try that by first. Next, press the gray (usually) button on the base unit and register the cordless again

...that "Base Unavailable" Select Base unavailable. The LCD should now say "Handset not registered, place in base" Just set it in the charging cradle on the base unit and it should register to the

...base unit. Up to 6 handsets can be registered with the DECT 1480 phones. I have the 5 phone unit and needed to add the 6th phone. All I got was "Searching" in the display and the battery wouldn't ...