...tv You have a dual receiver and 2 remotes. make sure that receiver is in dual mode. That you press the sat key on remote 2 if it will still not operate take remote 2 to the receiver. With remote #1 ...
TV 2, only TV 1. If you are not getting a picture (black screen) on TV 2, you should change the setting for Shared View on your receiver. Make sure your receiver is in Single mode by pressing the Mode
...TV 2 should also illuminate indicating the receiver is now in dual mode. This will separate the 2 TVs and you can now watch different channels on both TVS, plus the remotes will now work. I hope this ...
Question about Televison & Video
2 to run the dual tv function via smart view? I`d assume not as it doesn t come up as an option (the remote control and game controller functions work fine) but have searched the internet but can&
Question about DISH Network Televison & Video
...TV 2). If the blue light does not come on when you press select or Power on the TV 2 remote, you are in single mode. Next to the mode light, there should be a single and dual indication for the mode ...
...TV. To do this is a quick fix. If you want the remote to control the TV1, make sure the remote has a green '1' tab in the bottom. Once that is done, access the system information screen and program ...
Question about DISH Network Televison & Video
...TV 2 has a 2nd tv off of it and then a slave tv off of it in the basement. I wish I could find out what the problem is... right now resetting the system doesn't even work... it doesn't work to press ...
Question about DISH Network Televison & Video
...TV's. On the front of your receiver may be a "mode" button. If it's there, push it and the mode will switch between Dual and Single. There is an orange mode light that will moved.If it's ...
Question about DISH Network Televison & Video
TV 2? Depending on the receiver model, you have a mode button either on the front of the receiver or behind a door on the right side of the receiver. You also should have a green (TV 1), amber (mode),
Question about Televison & Video
If you put the remote up close to the sensors on the receiver (TV 1) or the antenna on the back of the receiver (TV 2, if dual receiver), does it work normally? Please let me know. Thanks
1,586 questions posted
Usually answered in minutes!
265 Questions
120 Questions
120 Questions
78 Questions