Whirlpool MH7135XE Microwave Oven "light clock works power" Questions

...It only says "Please Press Clock" all operational buttons will not work (Time set, clock set, fan and external light and all other features) only the internal light works. No fuses or circuits out ...

...clock and timer function, but virtually nothing else works.The stove facing lights and fans do not work, the interior light doesn't function either. When activated, the Microwave timer goes ...

clock then there is a problem in the electronics it could have went blank because of no power at one time , which can happen even where it is plugged into ( just a bad connection or when the microwave

...light flickers in the display as the timer counts down. Will not restore until clock is reset. Then it happens all over again. Hi try unplugging form mains for an hour this will reset any settings ...

...power and clock both work. replacemotor under microwave I had this problem and it was the door switch - $10 part though tons of time spent diagnosing it, including pulling out and testing the ...

...light, the clock works but nothing else turns on, including the fan, light, microwave I have a Whirlpool microwave hood combination, model YMH1141XM. After changing a blown cooktop light, the clock ...

...light turns on and then goes off. The display shows PRESS CLOCK again. Sounds like your losing power, have you tried it on a completely Different circuit??? Either that or bad fuse or connections ...

...Clock and interior light work. Unable to set the clock or do any other function controlled by the touch panel. you should change the touch panel and or the control module.check to make sure the power ...

light still comes on, and it's still beeping for no reason. Is there anyway to reset it or solve this? Thanks! Hi, this is usually a bad touchpad. The way to tell for sure is to kill power to the unit