Question about Canon PIXMA Office Equipment & Supplies
...REMOVE THE PRINT HEAD ASSEMBLY ON A CANON MX340? Follow the given steps:1. Confirm that the printer is powered on.2. Open the paper output tray and top cover.Note: Gently open the paper output tray ...
...paper. Any suggestions???? I solved this problem. When you get the message close the cover. (You must press print to get to this stage.) Remove the tray. Close the cover. Press OK. Then wait a few ...
...paper output tray while holding it. After confirming that the print head holder has moved to the center, open the inner cover. Remove all ink tanks. Raise the print head lock lever and remove the ...
...paper output tray and top cover. Make sure the print head holder is in the center and open the inner cover. Remove all the ink tanks. Raise the print head lock lever and remove the print head. Reseat ...
...paper is jammed, remove the jammed paper, reload paper in the printer, and then press the RESUME button. If the paper output tray is closed, open it. See Paper Jams Four flashes: Empty ink tank Press ...
Question about Canon PIXMA Office Equipment & Supplies
...Paper Output tray if it does not open automatically and remove the ink tank whoe lamp is flashing red fast. Do not touch the Print Head Lock Lvever. Remove only the ink tank. Important : * Handle the ...
...Paper Release Lever, then remove the jammed page from under the roller to the Document Feeder Cver side. 5. Pull out the jammed document from the ADF. 6. Press down the Paper Release Lever, close the ...
...Paper Output Tray (2). Open the Inner Cover (2). The print head holder (3) should be centered. Lift up the lock lever and take out the print head. The print head can be removed with the ink tanks ...
...Remove all sheets of paper from the rear tray, then click 'OK'. Confirm the following message, and click 'OK'. Note: Clicking 'OK' will activate the paper feed rollers 30 times. This activation will ...
Question about Canon PIXMA Office Equipment & Supplies
...paper output tray at the front of the printer. Lift the entire printer cover, which should snap open. Then lift the small inner cover. Press down on the tab below each ink tank to snap out and remove ...
1,451 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions