Question about Minolta Office Equipment & Supplies
...streak marks i have a Minolta CS Pro EP 1031 Printer that leaves black streak marks on copied sheet. I have cleaned the rollers and the problem reoccurs. Drum cleaning blade has gone bad. Especially ...
...clean cartridges. This worked however we still see faded black streak marks. Any other suggestions? Thanks. If an inkjet printer gives white streaks where it should be black, it means the ink is very ...
Question about Office Equipment & Supplies
...clean the glass in the area where the streak is occurring. This is a common problem with most multi function machines. A little rubbing alcohol will make your job easier but any glass cleaner should ...
Question about Sharp Office Equipment & Supplies
...clean copies. Hello Paul, There are no "cleaning sheets" for this unit. Typically when this unit starts leaving marks on printed copies then it is time to do some maintenance on it. By maintenance I ...
Question about Canon PIXMA Office Equipment & Supplies
...or a ring of toner that the wiper is not picking up because a nick or something under it. Try cleaning the drum with a very soft dry cloth and inspect it again. If the mark is still there the ...
Question about Canon PIXMA Office Equipment & Supplies
leaving a big streak mark and i think its the roller how do i clean it? If it is the same pattern on every page you print, it is your fuser; and there is no cleaning it. The fuser needs to be replaced
...clean the glass strip with alcohol. 2. If the marks are solid lines across the page, the problem is the photoconductor unit (PCU). This unit is a whole replaceable all-in-one unit -- replace the PCU ...
...clean the "fuser" roller with a little alcohol and your finger nail (after it's cooled down) to scratch off the toner, if it's an actual scratch on the roller you need to replace the fuser as it will ...
...leaving horizontal bands. After many cleanings with no luck I tried cleaning the heads with a bunch of Q-Tips lightly coated in Windex. After removing a ton of black deposits - it didn't immediately ...
...glass, any marks on there will leave a streak because it is the white reference for the scanner. after that you will probably need a new scan assembly because sometimes single elements will burn
1,451 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
