...counter top??? I'm surprised an etching solution damaged it... what was the etching solution for, glass, metal??? to be honest I would try to find a spot of the counter top somewhere that is not ...
...counter top, but it's really not safe because it has no feet, and it may slide and fall off the counter. Also, it will probably not set level on a counter. You can download GE owner's manuals ...
...back of the oven. This is true of most counter top models, but on over the counter models, it may be on the inside of the cooking cavity or around the door opening, door frame, or control panel
counter-top model or an over-the-range microwave? Do you have a brand and model number? And which light bulb do you want to replace - the cavity light bulb, or the bottom light(s) of an OTR microwave?
...counter top model or is it mounted above a stove in place of a vent hood? If the latter, then there may be a wall switch somewhere you haven't noticed that controls the exhaust fan--or it might be ...
to do something like use a small counter top fan to help circulate the air better. Please let us know if we can help further. We're happy to help and we appreciate your thoughtful rating of our answer
Question about Panasonic Microwave Ovens
...counter top from demo mode to ther mode to progam and heat and warm up timed dinner plate and heattimed hot meal or beverage give ne insructions of what to do pluggedin my Panasonic countertop micro ...
Question about Kenmore Microwave Ovens
counter top and used? Most over-the-range (OTR) microwave ovens have the exhaust fan funning at low speed when the microwave oven is working. This is to keep the magnetron and electronics cool. And it
Hotpoint Counter Saver Microwave not working Turntable spins, all lights are on, but it will not heat. Could a fuse have gone bad? model RVM1435 runs for 1 min then shuts off the window... Have to ...
...counter top unit or is it a built in? if it is a built in i would suggest fixing it, and if it is a really expensive counter top i would fix it, but the part cost about $80 to $100. so it would be up ...
44 questions posted
Usually answered in minutes!
216 Questions
111 Questions
92 Questions
78 Questions
76 Questions