QSC MX1500A 2-Channel Amplifier "offset light" Questions

...light. Well, one channel takes about 15 minutes to switch over. This has never happened before. Eventually it switches over and the channel works perfectly. But why is this happening??? How can i get ...

...light and offset lights on i checed all wires and all fine I have a Sony X-Plod amp 760w 2/1 channel xm-1902gx. Everything is connected properly and the amp contains 4 lights (power,over current and ...

...light flashing If you have a red flashing indicator, your amp has DC Offset, meaning a damaged amplifier. If you are interested in having your Carver repaired, please look to my website at ...

...light stays on regardless of the input setting and after removing all inputs and outputs to the system. Your amp is probably in Protect Mode, meaning you have DC Offset( a damaged amplifier). That ...

...light blinking or illuminated? If so, your amp has DC Offset, meaning a damaged amplifier. The static noise you heard, may have been DC voltage on the speaker output. If you are interested in having ...

...light anomaly? And the fan having some power but insufficient to turn. Any insights and advice will be appreciated. Cheers. So the standby indicator never changes state? If so, more than likely, your ...

...LIGHT WENT OUT. COULD THE SWITCHES BE BAD OR IS IT THE CIRCUIT PRIOR TO THE SWITCHES. I HAVE A SCHMETIC OF THE AMP BUT IT WON'T TROBLE SHOOT. ANY HELP WOULD BE APPRICIATED. THANKS DG It is possible, ...

...light didn't go out and I can't get any sound out of it. How can I get it out of stand-by mode when pushing the stand-by button doesn't work and unplugging it and replugging it in doesn't work? Given ...

..., and proceedtroubleshooting without the power transistors connected. •  Check for offset voltage on each of the main amp output. •  Check for idling currentA good amp

Sony ta a44 amp.lights up no sound Nothing Your unit has DC Offset. Please see my other posts.