Question about Canon PIXMA Office Equipment & Supplies
...need to bring your printer to the nearest service center to get waste ink absorber replaced. Source: Printer Clinic: Printer Tips,tricks,troubleshooting E-manualshop: Online source of service ...
...ink collector pads. Before proceeding please turn off your printer and unplug it from power source. To locate these pads open the cover of the printer, move the cartridges with your hand. Now you can ...
...source=video&cd=2&ved=0CDMQtwIwAQ&url=http://www.youtube.com/watch?v=4IrBdw7el2E&rct=j&q=Clean Ink Absorber in Canon PIXMA ...
Question about Canon PIXMA Office Equipment & Supplies
...ink counter: Plug in power cable Press POWER button while holding down RESUME/CANCEL button then release RESUME/CANCEL button (do not release POWER button) Press RESUME/CANCEL button two times while ...
Question about Canon PIXMA Office Equipment & Supplies
ink absorber full/reset process printer powered off but connected on power source , you must: 1. Press & hold stop/reset button, and then press & hold [ON/OFF] button. 2. When Green power lit,
Question about Canon PIXMA Office Equipment & Supplies
...may take at least a day. When it is completely dry, reassemble. Replace the waste ink absorber pads and sponge. Connect the printer to the power source. If this was helpful please rate it.. ...
...you turn on the printer,waste ink absorber full error is cleared and the printer work normally. Original source: ...
Question about Canon PIXMA Office Equipment & Supplies
Ink cartridge temperature rise error - E29 EEPROM error E33 Paper feed position error E35 15 USB Host VBUD overcurrent error - USB E37 17 Abnormal motor driver error E40 20 Other hardware error E42 22
Question about Canon PIXMA Office Equipment & Supplies
...ink absorbers. Then place the absorbers under running water until the water runs clear. Let the parts dry. You can use a hair dryer to speed up the drying time. (Alternatively, ask Canon to send ...
...ink absorber'. Can you help please? Thanks Mel Service mode operation procedures 1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the ...
1 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions