Kenwood KAC-5203 Car Audio Amplifier "hookup woofer" Questions

hookup I am assuming you are driving a sub-woofer. Run the amp bridged at 4 ohms. So a DVC(dual voice coil) 8 ohm sub with voice coils wired in parallel would give you a 4 ohm load. Just make sure the

hookup a Phoenix Gold (PG) 12" woofer with dual 4ohm inputs on each side of the speaker. If I just hook up one side, it clips and the amp's protection circuit kicks in as soon as I turn up the volume.

...hookup info... Please update the question & let us know if the information given was useful to you - Good Luck! this amp is fine to push 5 speakers. it is 2 ohm stable in stereo. what you need to do ...

WOOFER is rated below 500w while the amp is 1000w. You may have overdriven the sub, burning it, and resulted in the fuses on the amp being blown.Hookup the amp to another speaker, if it plays ok, your

...woofer - 1 x red & 1 x black) but at the back of the amp in question it has 4 x inputs with channel 1 written next to one of the inputs,channel 2 written to the next input and so on up to channel 4. ...