Question about Dell UltraSharp Computers & Internet
my monitor goes half red pin striped and black w/ some visibility my monitor goes half red pin striped with some visibility and half black and red pin striped with nothing visible the options are ...
DELL LCD 1901FP PlZ Find IC Number my lcd 1901FP Power not on I check Power card Ic 14pin opposite serface power ic Damage and Falsh card Power Section I need Number This ic then relpace ic. The 8 pin
Question about Dell UltraSharp Computers & Internet
...(DVI) Audio OutputType None Input DeviceType None Expansion / ConnectivityInterfaces 1 x VGA - 15 pin HD D-Sub (HD-15) , 1 x DVI-D - 24 pin digital DVI , 1 x Composite video input - RCA , 1 x ...
12v of Power Supply for Dell 1800FP Do I touch ground w/ muti meter lead and then touch each output pin that goes to ribon cable? I am getting zero voltage. Even going across two pins at the same time
Question about Dell UltraSharp Computers & Internet
The monitor will display the word"analog" and then blinks off This monitor is about 6 months old. The monitor powers up and the word "analog" is displayed on the srceen and then after about minute or ...
Question about Dell UltraSharp Computers & Internet
...itself. One of the connectors could be damaged, or you could have a bent, broken, or missing pin within the connector. If a pin is bent and touching the shell of the connector, it can send the ...
Question about Dell UltraSharp Computers & Internet
Dell 1800FP, no signal found (analog). Green LED on, get message When I power on the monitor, it does not receive the video signal, I get the box that says no signal. This tells me that the backlight ...
Question about Dell UltraSharp Computers & Internet
Dell E197FP - Screen turns off and on constantly This is driving me crazy. I had my E197FP monitor for a year and it was flawless until now. Randomly the screen will turn off and come back on. The ...
Question about Dell UltraSharp Computers & Internet
however, is a broken cable or connector. Check the plug and socket of the cable for bend or broken pins. If everything looks OK, try to change for a different cable. If the problem persists, a pin of
...monitor and flat screen monitor was given to me. Noticed the cable on the reg monitor is a 15 pin conn but pin #9 is not used. On the flat monitor pin #9 is used. Do I need a special graphics ...
16 questions posted
Usually answered in minutes!
101 Questions
94 Questions
96 Questions
77 Questions
74 Questions