...Water build-up because energy saver was on has caused some mold to appear on the seals. Energy saver is now off, but how do I safely remove mold? Try using chlorine bleach, use gloves to protect your ...
...Water dripping onto floor form my refigerator. I believe it's from the freezer. I see consensation beaded up along the sides of the door. I also noticed on the underside of the freezer door, a small ...
...saver will save you some money on your power bill. if it sweats between the doors then the switch needs to be set to reduce moisture to prevent mold and mildew build up on the seals and the water ...
...water dispenser. The freezer and refridgerator seem to be operating fine but this hot spot seems to be indicating something is wrong. Does anyone know what could cause a hot spot on the side in that ...
...water and cubed ice (the setting it was last on) - cannot change to crushed or use touch screen at all. Unit seems to be cooling and freezing normally. I'm not sure what all the wild goose chase ...
...water in the tank meet. What you are noticing is normal and is no cause for alarm. Today's fridges no longer employ "energy saver" switches, as the heating element and technology has improved to the ...
...water outside on the front doors.. otherwise the fridge works properly if the unit has an energy saver switch, turn it to the off position. that should activate the mullion heaters on the outside ...
Question about LG Refrigerators
...I've selected Ice Plus and took operation out of Enegy Saver Mode. Also turned unit Off and On. You have awater problem not an icemaker problem...inlet valve bad or water source
...and water lying in the base. The freezer is not cold enough. CAN YOU TELL ME IF THERE IS ANY ICE FORMING IN THE FREEZER?AND IS YOUR FRIG. SET ON ENERGY SAVER ORLESS HUMITIY SETTING,LET ME ...
1,017 questions posted
Usually answered in minutes!
1,894 Questions
611 Questions
487 Questions
348 Questions
283 Questions