...empty...No sound or images HP dc7100 sff pc came with CD-ROM. I removed it and installed a CD-Writer from another HP. 4-prong power plug is in, ide ribbon contr. is in...driver ...
...empty space and hit properties then the hardware tab then then device manager then click ont he plus sign on ide ata controlers then right click primary ide controllerss and go to properties and then ...
empty hard drive in to install a copy of xp,but it insistes on doing the same thing,, just the beeps, maybe 1 second apart and nothing on the screen The beeps that you are hearing are messages created
...empty it is bad. You have to replace it. If you are successful in seeing with folders, remove the cmos battery from your system for 30 seconds then reinstall and boot it up. This will place your bios ...
Question about HP dc Computers & Internet
...empty bay. Take the old screws off of the old D drive and put them in the same position on your new D Drive. Next on the back of your drive is going to be a jumper that is covering pins, make sure ...
...empty drive bay on the chassis, skip this section and go to Step 5 . Find the hard drive. The hard drive usually sits under the CD and DVD drives and has a thin flat ribbon cable. Disconnect the IDE ...
...empty bay and secure with screws or other attaching device provided by the manufacturer. 5 3.Connect the open connector on the ribbon cable (red stripe towards power cable) to the new DVD-ROM drive ...
ribbon cables (or SATA cables, which are smaller and usually red) connect to the main board. Find the cable that corresponds to the free drive either primary or secondary. STEP 3: 1.Set the jumpers so
empty bay, follow our steps for adding a second drive. After formatting it, use Norton Ghost (or a similar program) to clone your boot drive's contents to the new drive. Then, revisit steps 3 and 4 to
171 questions posted
Usually answered in minutes!
155 Questions
91 Questions
83 Questions
77 Questions
77 Questions
