master, it says unknow device. What should I do? Try the drive in another machine to isolate the problem. If the drive works and its your system you may have to do the following Update your BIOS Place
...Channel UDMA 2 Is master on secondary IDE Channel Sony DVD RW DRU-510A is slave on IDE, it will read Music Cds, Program CD's, but not program dvds or any dvd's. Is a new install of XP Home Edition ...
slave on one IDE channel, with the other 2 CD drives on the other IDE channel, one set to master and one set to slave. So, pull the CD drives out and check the master/slave jumpers on the back of them
...that when you fitted the drive that the plastic jumper cap on the back of the writer was set to master if used on it's own IDE cable, or set as slave if it is sharing and IDE cable with another ...
...channel can control two IDE drives, a master and a slave. BIOS: Basic Newer computers use what?s called ?cable-select?, basically the IDE data cable tells the computer which drive is the Master and ...
...see it. How do I correct the problem? Terry Stimmel [email protected] Hi, Change the Jumper To Master Or Slave. CS Is cable Select, your computer may not support this Option. If installing on a ...
...master & 1x slave on an IDE channel, if you set to the wrong one then the devices will conflict, if you are replacing a drive check what setting it had and replicate the same setting on the ...
...master / cable bridge settings at back of cd are fine.In this case the fastest way to test your unit is to connect it as single unit with a tested ide cable on the computer, just to test it. On the ...
...Master (with slave present)" jumper setting, and the optical drive should have "Slave". This is a slightly worse solution, as the optical drive will slow down the hard disk a bit, and also ...
Question about Sony Computers & Internet
...ensure that the drive is set as Master/Slave. if on the same Bus/IDE channel as a hard-drive. set as master/slave opposite to what the hard-drive is setup as. Hope this helps. Mike @
1 questions posted
Usually answered in minutes!
164 Questions
43 Questions
11 Questions