...wireless router has RJ45 connectors (8 wire cable) and the telephone cable has narrower connectors RJ11 (4 wire cable) or RJ12 (6 wire cable - less commonly used). I assume the Dynamode wireless ...
...wiring setup you have. It depends which type of cable you are talking about (see images 1 and 2 below) In some countries, the RJ11 to RJ11 cable goes from this device into the phone Socket of an ADSL ...
...i dont know how to reconnect my phone, cable, and internet wires back correctly. You will have one RJ11 slot on the router with a Phone symbol Connect your phone line to it You will have a RJ45 slot
...the setup. The modem connects to the wall with a standard telephone wire. (The ends are known as
Question about Belkin Computers & Internet
my isp offers internet through a rj11 wire that goes to a modem,then a rj45 that goes to my laptop.How do i connect a belkin router that only has rj45 outlets/inlets? Plug the rj45 from the modem to ...
...(NIC) that used an industry standard RJ45 network jack (8 wire connection similar to a telephone RJ11 connector) Most people now have broadband service (Cable Modem or DSL Modem) that has RJ45 ...
...wall point where the connection from the DSL and telephones . Check the cords and try changing the RJ11 cords . RJ cors the phone thin cords . NOTE : FILTERS SHOULD BE INSTALLED FOR TELEPHONES BUT ...
Question about Linksys Computers & Internet
...off of my router(Internet) wire The RJ45 connector on your network cable is like a big Phone plug (RJ11). It has latch on the top that must be pressed down to remove it from the socket. The wire ...
......
146 questions posted
Usually answered in minutes!
537 Questions
362 Questions
240 Questions
227 Questions
171 Questions