Samson G-TRACK USB RECORDING MICROPHONE Microphone "low mic volume" Questions

...mic is low, any possibility increase the volume? do i need to use the external Amp? I have HT-1001 microphone, when used to communicate for a transmitter application, the received volume is very low, ...

...low volume if plugged into Mic input in rear of machine. i has recently purchased the forntech micro phones for my system.i am able to hear the music from the system but i am not able to record my ...

...mic (like the one in the photo) you don't need phantom power. Also I run my mics and instruments through a mixer, then into the unit. Also if you're mixing your masters at a low volume, the CD will ...

...low volume. It has been working fine with our system for years. Tried other sm58 mics on the same mic cable with same system setup and no troubles. There is still some volume but very little. Check ...

...preamp is not working correctely. condenser microphone voltage is very low or mic is fault . check your microphone cable . preamplifer of condenser mic may be leaking .check ur mic driver and audio

...low mic volume and that seems to reduce the problem, but it still occurs sometimes. It seems as if the mics are extremely sensitive, or that extreme sibilance occurs within a certain vocal frequency ...

low in volume. This mic needs phantom power to operate. Best bet, go and buy a USB mic pre, such as a M-Audio product. This mic, I believe also runs on a battery, when phantom power is not available..

...mic volume is still low but when you touch the shaft on the e6 earset it is very loud. You likely broke one of the 4 wires between the circuit board in the pack and the connector for the mic when you ...

...mic with a tie clip. when I set it up the sound is very low. If I increase the volume, it feedsback immediately. how best can I set up the tie clip mic. Typically you want to wear the mic 6 to 8 ...

Low volume from passive mics !! I'm using stage mics (Shure SM-58s) and the signal is barely showing on the meter. I've tried turning up the input volume...I cranked it up so high that I'm getting ...