...ballast lamp too , is it work or not ?. Its a simple way to check the ballast lamp. Unplug the lamp, than turn on the TV set. If you hear sound like high voltage from ballast, that mean OK. The ...
Question about Samsung Televison & Video
lamp ballast in my Samsung model # HLS5086WX/XAA? I am trying to replace the ballast in my Samsung TV. I have purchased the ballast and I can see the old ballast but I can not figure out how to remove
Question about Samsung Televison & Video
but i guess that didn't work. So my question is should i focus my attention on the lamp again or do i got to see if its the ballast? The Ballast,even dust on the lamp some how,whould kill it that fast
lamp during install. Especially the screw on the side. It should be a tight connection. Send the lamp back and get a new one. Usually they come with a warranty. If the new one doesn't work, it'
...problem after replacing the lamp then you may have a faulty Lamp Driver Board, or Ballast as we call it, the lamp ballast provides the high voltage to the lamp. With this high voltage lamp lights. ...
...lamp ballast or ballast board. it that the same thing or two separate entities? can i install a new board myself or do i need a repair person to do it? Ballast and ballast board are same thing but ...
...install a replacemnt bulb on a 52 in jvc tv...I ordered the same bulb thought we put it in correctly but still does work...We heard the bulb "pop" when the tv stopped working Replaced the ...
...ballast is attempting to light the Lamp. The Connector PSL is a very small connector that actually faces down with the ballast is installed. It is also very difficult to access. It's much easier to ...
...ballast which powers on the lamp is bad. If you hear the buzz and see a spark than your ballast is good and the DMD board needs replacing which will cost around $500-$850 depending on where you take ...
24 questions posted
Usually answered in minutes!
1,031 Questions
445 Questions
373 Questions
357 Questions
327 Questions