Question about Linksys Computers & Internet
...to log in. if broadband, check timeout and mtu settings. mtu around 1560 is best . Also make sure gateway setting both ways, router / gateway timeout should be always on , not on demand. good
gateway timeout error 504 If your router is spitting out a 504 error, that usually means the site its trying to communicate with is down. More specifically, the server is not responding to the data ...
...gateway from the BB, it gives me a timeout response therefore phone is not able to browse internet etc. He is not able to ping himself as well. The router is configured as a gateway. Any help is ...
...gateway address no {}} the expected responses will be either 4 timeouts or 4 lines with elapsed times. Timeout is failure -- elapsed times means it was connected. For each router I need to know the ...
...gateway is 192.168.0.1. I'm using a Motorola svg1501e Regards, Click Start Click Run Type CMD and press ENTER. Type PING 192.168.0.1 Do you get 4 "timeout" or 4 "reply" messages? Within Internet ...
...enter then record all of the following for each adapter adapter IP address Subnet Mask Default Gateway one or more DNS addressesThe back in the window enter the following command using the ...
Question about Belkin Computers & Internet
...gateway from ipconfig if different) ping 192.168.2.1 this should display 4 messages with elapsed times if it works and 4 timeout messages if it fails. Once when wired and once when wireless -- from ...
...gateway.2wire.net Click the Firewall tab -> Firewall Settings link -> Edit Firewall Settings page. Click Add a new user-defined application in the Application panel to open the Edit Application page. ...
...gateway does not timeout. IF your gateway address does not begin 192.168.2.? and your router's lan address is the factory default 192.168.2.1 then we are looking for another issue. Please respond to ...
...gateway.2wire.net/mdc? or ?http://homeportal/mdc? (without quotes) instead. If you?re prompted with password (especially for SingTel mio device), key in ?2wire? (without quote), or try default 2Wire ...
8 questions posted
Usually answered in minutes!
86 Questions
43 Questions
22 Questions