Infinity 475A Car Audio Amplifier "amp not power sub" Questions

an amp without knowing how much power your sub can handle. Audiobahn makes from very power amps that can put out up to 5000W RMS, but if your sub can not handle that power, then you will blow your sub

...amp, to power my pioneer champion series TS-W307D4 rms ratings: the amp is rated at 250 W rms, the sub at 400 W rms When the amp's settings are normal, i mean when its pumping exactly the 250 watts ...

...power my amp was hooked up to four subs two alpine type e's and two sony p5s. it just shut off and wont turn back on. i checked it and its getting power. are u sure you didn't blow a fuse? check the ...

...amp power wire, the sub has not worked. Everything is tightly connected. What could be the problem? I would double-check your RCA's on the amplifier. You should hear a thud if you unplug them. If not ...

power from the amp without ruining your sub. The amp puts out full power into a 2 ohm load so option -A- is to just run one coil off the sub and it will absolutely pound -until you roast the coil.Then

...amp for speakers and one is solid audio f2500d for 3 subs my sound and every thing was good but suddenly from yesterday im having trouble when i power on my cd player all my subs make a noise which ...

...amp is way too small to power a 15 inch sub. But you should get some sound out of it, not silence. You can use a 9 volt battery to test your sub, if the sub pops when the 9 volt is placed across it's ...

...that low of power. the fading you are hearing sounds like the amp is being overdriven and it is hard clipping because it doesnt have enough power for the subs. that amp is designed for mids and

...power 2 the sub and i have no i da whats wrong That's a 4-channel amp, not a 2-channel, which makes me wonder exactly how you have it hooked up to your sub. Is the LED light on the amp coming on? How ...

power handling capacity and select a monoblock amp that provides close to the maximum at the impedance they will be wired to present. For example, if your subs are 4 ohms and have a maximum RMS of 250