Whirlpool ED2FHSS Side by Side Refrigerator "door hard open" Questions

door there is a vacuum occuring and causing the doors to be hard to open. Take someting like a popcicle stick, break it in half and put them together, one on the other and tape it to the gasket at the

door is unusually hard to open, I My Sub Zero refrigerator door is unusually hard to open, I realize that there is a vacume seal on these doors but it has recently become extremelly difficult to open.

...door is closed hard This is normal operation,the new units are very efficient and air tight so when you close one door especially hard you are forcing air into the inside that has to escape somewhere ...

...it swings quickly to the right. The other door will stay where we put it. It is frustrating. Can this be adjusted so the door doesn't swing so hard when we open it? yhe leveling of the unit will ...

...door immediately thereafter they are extremely hard to open, as though a vacuum is holding them closed. You have to use a great deal of force which will certainly damage the handles in time. For now ...

...hard to open door problem. He duct taped a small section of a straw (about 4 inches) to the inside top of the door frame so that one end of the straw was inside of the fridge and the other end was on ...

door shuts too fast, it pushes a lot of air into the unit. It needs to go somewhere so, it pops the freezer door open. If you shut the freezer hard enough, you will be able to pop the fridge door open

...door from sticking too much and making it hard to open Its a one year old fridge and it suddenly became hard to open both freezer and normal doors. The rubber sticks harder together. Is this a ...

...side door is hard to open If you mean the initial "tug" when you open the door, there is most likely absolutely nothing wrong with your refrigerator. that tug you feel is a secure door to frame

...hard to open. It is usually only after the door has been closed a while that it will be hard to open. put your finger around the edge of the door and shift the seal slightly, this will release the ...